Table of Contents
Advertisement
6 Operation
6.21 Using service data
6.21.1 Uploading service data to
Requirement
Result
216
EN
MEDUCORE Standard
Service data are device data which WEINMANN Emergency can use
to analyze the device in the event of a fault. Service data do not
contain any patient data. There are two options for making service
data available to WEINMANN Emergency Technical Service in the
event of a fault:
•
Upload service data straight to WEINMANN Emergency
"6.21.1 Uploading service data to WEINMANN Emergency",
page 216)
•
Export service data to SD card and e-mail them to Technical
Service
(see "6.21.2 Exporting service data to SD card",
page 217)
WEINMANN Emergency
•
A default network has been configured
default network", page
•
The device has been registered with WEINMANN Connect
"12.4 Registering the device with WEINMANN Connect",
page
298).
•
The user menu is activated
menu", page
252).
Alternatively:
The operator menu is activated
operator menu", page
1. Select System settings | Service | Upload service data to
WEINMANN.
The service data are uploaded to WEINMANN Emergency.
When upload is successful, the symbol
display. If upload is unsuccessful, the symbol
the display and an alarm is displayed
messages", page
2. Confirm with the OK function button.
The service data have been uploaded to WEINMANN Emergency.
2
292).
(see "10.1 Navigating the user
(see "13.1 Activating the
307).
271).
(see
(see "12.3 Configuring
appears in the
appears in
(see "11.2 Alarm
(see
Advertisement
Table of Contents
