3 Description
No.
Designation
Patient group
6
Mode indicator
7
Alarm limits
8
Alarm off indicator
9
AED instructions
10
Analysis
11
Monitor mode
12
Manual mode (only with Manual
13
defibrillation option)
ECG calibration mark
14
NIBP
15
Pulse
16
SpO
17
2
Center curve field
18
HR
19
Top curve field
20
Upload symbol
21
Printer symbol (only with Printing option)
22
40
EN
MEDUCORE Standard
Description
Displays the selected patient group:
•
Adult
•
Child
Indicates the mode currently selected.
Displays the set alarm limits.
Indicates whether alarm output is deactivated in AED
mode.
Give instructions on carrying out CPR.
•
Allows you to start a cardiac rhythm analysis
manually.
•
Only displayed if Start analysis automatically is
deactivated in the operator menu
settings", page
Provides access to monitor mode.
Provides access to manual mode.
Displays the section corresponding to 1 mV of the ECG
signal.
Displays blood pressure.
Displays pulse rate.
Displays oxygen saturation.
Displays the plethysmogram.
Displays heart rate.
Displays the ECG lead (Pad, II).
•
Indicates that e-mail delivery 12-lead ECG has
been started (only with E-mail delivery 12-lead
ECG option).
•
Indicates whether the last e-mail delivery started
was successful (only with E-mail delivery 12-lead
ECG option).
•
Indicates whether the function check has been
uploaded to WEINMANN Connect successfully.
•
Indicates whether the session data have been
uploaded to WEINMANN Connect successfully
(only with Upload session data option).
•
Indicates whether the service data have been
uploaded to WEINMANN Emergency successfully.
Indicates whether the printer is connected to the
device.
2
(see "13.3 AED
310).