Travel With The Therapy Device - Weinmann VENTIlogic LS Instructions For Use Manual

Ventilogic ls - single patient circuit with patient valve; ventilogic plus - single patient circuit with patient valve
Hide thumbs Also See for VENTIlogic LS:
Table of Contents

Advertisement

Available languages

Available languages

Caution!
When covering the memory card with the rubber cover, take care not to push in
the card accidentally, as doing so will eject it from the device. Ejecting the card may
cause loss of therapy data.

5.14 Travel with the therapy device

5.14.1 Bags for the therapy device
The therapy device has two bags, a protective bag (WM 27106) and a carrying bag for
mobile use (WM 27706).
Proceed as follows to put the memory card back in.
1. Pull on the rubber cover to get at the slot for the
memory card.
2. Push the memory card into the slot with the cut-off
corner pointing upwards.
3. Briefly press on the card so that the card can engage
in the device with the aid of the spring mechanism.
4. Cover the slot for the memory card again using the
rubber cover.
The protective bag WM 27106 is supplied and is for
protecting the device but not for mobile operation.
The carrying bag WM 27706 is available as an accessory
and allows the device to be operated on a mobile basis.
The therapy device can be operated together with
VENTIpower in this bag.
EN
Operation
63

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ventilogic plus

Table of Contents