Table of Contents
Advertisement
2 Safety
16
EN
MEDUCORE Standard
Risk of injury due to alarm limits which are too high or too
low!
Alarm limits which are either too high or too low may prevent the
device triggering an alarm, thereby putting the patient at risk.
Always set alarm limits which have been adapted to the
patient.
Risk of injury due to incorrectly set parameters or too few/too
many enabled functions in the operator menu!
Incorrectly set parameters or too few/too many enabled functions
in the operator menu may result in incorrect settings in the user
menu or too limited/too extensive device functions. This may
cause critical operating situations and injure the patient.
The operator menu should only be used by operators familiar
with the settings in the operator menu and their impact on the
user menu and device functions. Otherwise use the device with
factory settings.
Adapt the device functions to the user's know-how.
Protect the operator menu with a secure access code (at least
one letter and one number).
Risk of injury from incorrectly secured access to functions!
Too simple an access code gives the user access to functions with
which he or she is not familiar or in which he or she is not trained.
This may cause the patient or the user serious or life-threatening
injury.
Protect functions with a secure access code (at least one letter
and one number).
Risk of injury from operating the device, accessories, and
components outside the prescribed ambient conditions!
Use of the device, accessories, and components outside the
specified ambient conditions may lead to incorrect results to the
extent that the device fails, injuring the patient.
Only operate the device within the prescribed ambient
conditions
(see "18 Technical data", page
Allow the device, components, and accessories to acclimatize
to operating temperature.
2
367).
Advertisement
Table of Contents
