Table of Contents
Advertisement
7 Disassembling
7.1.3 Disconnecting the device from the 12 V
Requirement
Result
220
EN
MEDUCORE Standard
on-board power supply
The device is switched off.
1. When used in a protective transport bag: Open the rear of the
device compartment of the protective transport bag.
2. Disconnect the charging adapter from the power supply
connection.
3. Disconnect the charging adapter from the adapter cable for
12 V on-board power supply/circular connector.
4. Disconnect the adapter cable for 12 V on-board power supply/
circular connector from the 12 V on-board power supply.
The device is disconnected from the 12 V on-board power supply.
2
Advertisement
Table of Contents
