Weinmann MEDUCORE Standard2 Instructions For Use Manual page 326

13 Operator menu
13.6.2 Possible values
Parameter
Amplitude scaling
Feed rate
Line filter
326 EN MEDUCORE Standard
Possible
Description
values
Autom.
2 mm/mV Here you can set the amplification of the
5 mm/mV ECG signal and thus the height of the
10 mm/mV ECG curve.
20 mm/mV
12.5 mm/s Here you can set the feed rate of the ECG
25 mm/s curve display and so change the time
50 mm/s resolution.
Activated
By activating the line filter, you can
reduce ECG interference caused by the
Deactivated
power supply network.
2
Factory setting
Autom.
25 mm/s
Activated