Table of Contents
Advertisement
12 Configuration by the operator
12.4 Registering the device with
Requirement
298
EN
MEDUCORE Standard
WEINMANN Connect
A default network has been configured
default network", page
1. Apply to WEINMANN Emergency Customer Service for a user
account for WEINMANN Connect by telephone or by e-mail.
2. Log in to WEINMANN Connect at www.weinmann-
connect.com using the user account data (in accordance with
the WEINMANN Connect user manual).
3. Add a new device to WEINMANN Connect in accordance with
the WEINMANN Connect user manual.
When doing so, please note: A WEINMANN Connect
registration code is generated for the device.
4. Activate the operator menu
menu", page
307).
5. Select Communication settings | Register device with
WEINMANN Connect.
6. Enter the WEINMANN Connect registration code.
The device is registered with WEINMANN Connect.
2
(see "12.3 Configuring
292).
(see "13.1 Activating the operator
Advertisement
Table of Contents
