Table of Contents
Advertisement
13.7.2 Possible values
Parameter
Feed rate
Pulse tone priority
13.8 NIBP settings
Possible values
12.5 mm/s
25 mm/s
50 mm/s
Activated
Deactivated
In the NIBP settings submenu, you can make the presets for blood
pressure measurement and venous stasis. You can adapt the
device to the patient group using the specific NIBP settings.
13-11 NIBP settings submenu
Description
Here you can set the feed rate of the
SpO
curve display and so change
2
the time resolution.
Here you can set whether pulse tone
is to take priority over heart rate
tone.
The tone level of the pulse tone is
adapted to measured oxygen
saturation.
MEDUCORE Standard
13 Operator menu
Factory setting
25 mm/s
Activated
2
EN
329
Advertisement
Table of Contents
