Table of Contents
Advertisement
6 Operation
Result
6.9.2 Carrying out pulse oximetry monitoring
Requirement
162
EN
MEDUCORE Standard
6. Check whether the oxygen saturation values displayed on the
device are plausible.
A pulse oximetry sensor is connected.
•
The device is switched on
page
118).
•
A patient group is selected
page
120).
•
A pulse oximetry sensor is connected
pulse oximetry monitoring", page
1. If the patient group is incorrect: Select another patient group
(see "6.4 Selecting patient group", page
2. If necessary: Select monitor mode using the Monitor function
button.
3. If necessary: Switch between parameter view and curve view
with the view button
2
(see "6.1 Switching on the device",
(see "6.4 Selecting patient group",
(see "6.9.1 Preparing
157).
120).
.
Advertisement
Table of Contents
