Disassembling The Nibp Cuff And Nibp Connecting Tube - Weinmann MEDUCORE Standard2 Instructions For Use Manual

Monitor/defibrillator
Hide thumbs Also See for MEDUCORE Standard2:
Table of Contents

Advertisement

2. If the 12-lead ECG extension cable is connected: Disconnect
3. Disconnect the ECG electrodes from the ECG cable clips and
Result
An ECG cable has been disassembled.
7.5 Disassembling the NIBP cuff and NIBP
connecting tube
Requirement
1. When used in a protective transport bag: Open the viewing
the 12-lead ECG extension cable from the ECG cable with
connection for 12-lead ECG extension cable.
dispose of them.
The device is switched off
page
119).
The device is disconnected from the patient.
window and side compartments of the protective transport
bag.
(see "6.2 Switching the device off",
MEDUCORE Standard
7 Disassembling
2
EN
225

Advertisement

Table of Contents
loading

Table of Contents