Table of Contents
Advertisement
5
Function check
Disrupted or failed therapy due to defective device, defective
components or defective accessories!
Using defective devices, defective components or defective
accessories may result in malfunctions of the device, the
components, and the accessories. This may cause the patient and
the user serious or life-threatening injury.
Carry out a complete function check prior to every use
"5.2 Carrying out a function check", page
Only operate the device, components, and accessories if they
have no external damage.
Replace illegible or damaged labels.
Only use devices, components, and accessories which have
passed the function check.
Have defective devices repaired.
Have defective components and defective accessories repaired,
or replace them.
Observe the applicable intervals for function check and service.
After being switched on, the device carries out an automatic
function check which checks that all the key functions are working.
The device also offers a step-by-step guide to carrying out a
function check
(see "5.2 Carrying out a function check",
page
104).
When the device is switched on, permanent test routines are active
in the background which alert the user to malfunctions via an
alarm.
The correct functioning of some components cannot be checked
with the support of software. In such cases, users must assess
functionality themselves (e.g. external damage to the device,
functionality of the ECG cable or the NIBP cuff).
MEDUCORE Standard
5 Function check
(see
104).
2
EN
103
Advertisement
Table of Contents
