Table of Contents
Advertisement
1. Select the Print session report menu item.
2. To cancel printing of the session report: Select the Cancel
Result
A session report has been printed.
6.17 Analyzing sessions
6.17.1 Selecting a session in the session archive
Requirement
•
•
•
•
•
The device prints the session report with all the details specified
in the operator menu (abstract example shown here):
When doing so, please note:
•
The device only prints a resuscitation report in the session
report if a shock was delivered or a resuscitation mode
(AED mode or manual mode) was activated for > 2 minutes
in the selected session.
•
In the resuscitation report, the first two events from the
events list are recorded and counted
values", page
344).
printing menu item.
The device is switched on
page
118).
A patient group is selected
page
120).
A mode is set.
At least one session has been carried out with the device.
The user menu is activated
menu", page
252).
(see "13.12.2 Possible
(see "6.1 Switching on the device",
(see "6.4 Selecting patient group",
(see "10.1 Navigating the user
MEDUCORE Standard
6 Operation
2
EN
205
Advertisement
Table of Contents
