Disassembling Defibrillation Electrodes/Paddles And Master Cable - Weinmann MEDUCORE Standard2 Instructions For Use Manual

7.2 Disassembling defibrillation
electrodes/paddles and master cable
Requirement •
•
1. When used in a protective transport bag: Open the viewing
2. Unlatch the master cable and disconnect it from the Pad
3. Disconnect the Pad connector of the defibrillation electrodes
The device is switched off
page 119).
The device is disconnected from the patient.
window and side compartments of the protective transport
bag.
connection.
from the master cable.
Alternatively:
Disconnect the Pad connector of the paddles from the master
cable.
(see "6.2 Switching the device off",
MEDUCORE Standard
7 Disassembling
2
EN 221