Table of Contents
Advertisement
8. Test e-mail delivery in accordance with the instructions in the
display.
When doing so, please note: The duration for setting up the
connection and delivering the e-mail may vary depending on
reception quality.
9. Confirm with OK.
10. If the e-mail delivery was not successful: Check the setup of the
network and e-mail delivery 12-lead ECG.
11. If the e-mail is delivered successfully but transmission time is
unexpectedly long: Contact the system administrator of the e-
mail recipient.
12. Select the Back function button 2x.
13. Make the following settings for the 12-lead ECG to be
delivered:
•
Feed rate and duration
•
Amplitude scaling
•
View
Result
E-mail delivery 12-lead ECG has been configured.
12 Configuration by the operator
MEDUCORE Standard
2
EN
301
Advertisement
Table of Contents
