Table of Contents
Advertisement
No.
Designation
Top curve field
11
R wave marking (only with Cardioversion
12
option)
Center curve field
13
Bottom curve field
14
Energy
15
ECG lead selection
16
Monitor mode
17
Charge
18
ECG calibration mark
19
AED mode
20
NIBP
21
Alarm limits
22
Pulse
23
SpO
24
2
HR
25
Upload symbol
26
Description
Displays the ECG lead via the defibrillation electrodes/
paddles (Pad, II).
Marks the R waves detected by the device in the ECG
if SYNC has been activated in the application menu.
Displays the selected ECG lead:
•
I, II, III, aVR, aVL or aVF
•
V1 to V6 (only with 12-lead ECG extension cable
and only with 12-lead ECG option)
Displays the plethysmogram.
Allows shock energy to be adjusted.
Allows switching between the ECG leads displayed in
the center curve field:
•
Limb leads acc. to Einthoven (I, II, III)
•
Limb leads acc. to Goldberger (aVR, aVL, aVF)
•
Chest wall leads acc. to Wilson (V1 to V6) (only
with 12-lead ECG extension cable and only with
12-lead ECG option)
Provides access to monitor mode.
Charges the shock capacitor.
Displays the section corresponding to 1 mV of the
ECG signal.
Provides access to AED mode.
Displays blood pressure.
Displays the set alarm limits.
Displays pulse rate.
Displays oxygen saturation.
Displays heart rate.
•
Indicates that e-mail delivery 12-lead ECG has
been started (only with E-mail delivery 12-lead
ECG option).
•
Indicates whether the last e-mail delivery started
was successful (only with E-mail delivery 12-lead
ECG option).
•
Indicates whether the function check has been
uploaded to WEINMANN Connect successfully.
•
Indicates whether the session data have been
uploaded to WEINMANN Connect successfully
(only with Upload session data option).
•
Indicates whether the service data have been
uploaded to WEINMANN Emergency
successfully.
MEDUCORE Standard
3 Description
2
EN
43
Advertisement
Table of Contents
