Assembly; Wall Mounting; Device (Not Mounted In The Case Of Portable Systems With An Adapter Plate); Protective Bag (Life-Base 1 Ng/ Life-Base 1 Ng Xl) - Weinmann LIFE-BASE Series Instructions For Use Manual

4. Assembly

4.1 Wall mounting

The wall mounting for the portable system is ready for fitting to a wall. Using a suitable
attachment set (see Section 9.2 on page 28), you can also fit the wall mounting to a stan-
dard hospital rail or an ordinary rail (Ø 19 mm - 38 mm). When fitting, follow the relevant
fitting instructions enclosed with the wall mounting and the attachment sets in question.
4.2 Device (not mounted in the case of portable
systems with an adapter plate)
Note:
In most cases, the device is already mounted on the portable system. You only need
to mount the device if you order a device separately.
1. Unscrew the adapter plate from the portable system.
2. Screw the adapter plate onto the rear of the device.
3. Screw the adapter plate and the device to the portable system.
4.3 Protective bag (LIFE-BASE 1 NG/
LIFE-BASE 1 NG XL)
Attach protective bag
16
EN Assembly
1. Place the protective bag on a firm, level surface.
2. Place the portable system inside, on the base of the pro-
tective bag, or guide the base of the portable system
into the slot provided for it.
3. Attach the protective bag to the portable system using
the push-buttons.