5. Evaluate the ECG leads and heart rate.
6. If necessary: Select another ECG lead using the Lead function
button.
7. If necessary: Make the following ECG settings in the user menu
(see "10.3.2 ECG settings", page
•
Adapt amplitude scaling in order to adapt the displayed
height of the ECG curve to the ECG measuring signal.
•
Set Autom. for amplitude scaling to have the displayed
height of the ECG curve adapted to the ECG measuring
signal automatically.
•
Adapt the feed rate of the ECG curve.
•
Activate the filter to filter interference caused by the power
supply network out of the ECG display.
8. If necessary: Set alarm limits in the user menu
Alarm settings", page
Alternatively:
Set automatic alarm limits in the application menu
Application menu", page
259):
255).
248).
MEDUCORE Standard
6 Operation
(see "10.3.1
(see "9
2
EN
169