4.6.2 Removing the SD card
Requirement
There is an SD card in the SD card slot.
1. Open the water jet protection of the SD card slot.
Incorrect use may result in loss of data!
If you remove the SD card while data is being written to it, data
may be lost or the SD card damaged.
Only remove the SD card with the device switched off.
2. Briefly push in the SD card.
3. Remove the SD card.
4. Close the water jet protection to protect the device from
Result
The SD card is removed.
The SD card is ejected slightly.
ingress of dust and water.
MEDUCORE Standard
4 Preparation
2
EN
93