Table of Contents
Advertisement
6 Operation
6.16 Printing ECGs and reports (only with
6.16.1 Connecting the printer to the device
Requirement
196
EN
MEDUCORE Standard
Printing option)
Delayed therapy due to incorrect storage of the printer!
Storage outside the specified ambient conditions may lead to
printer malfunctions or damage the printer. This may delay the
patient's therapy.
Always store the printer within the specified ambient
conditions.
In the event of problems with the printer: Carry out a function
check of the printer
the printer (only with Printing option)", page
•
The printer battery is inserted
battery", page
97).
•
The printer paper is inserted
paper", page
98).
•
The printer is stowed in the printer case
the printer in the printer case", page
•
A printer has been paired with the device
printer with device (only with Printing option)", page
Risk of injury from defective printer!
A defective printer may lead to electric shock if touched. This may
injure the patient or the user.
Always operate the printer in the printer case.
Delayed therapy due to printer not being ready for use!
The device cannot be connected to the printer if e-mail delivery
12-lead ECG or network data transmission are taking place in
parallel.
Wait until the e-mail delivery 12-lead ECG or network data
transmission is finished.
If necessary: Switch the printer on again.
2
(see "5.6 Carrying out a function check on
(see "4.7.2 Inserting the printer
(see "4.7.3 Inserting printer
100).
117).
(see "4.7.4 Stowing
(see "12.2 Pair
290).
Advertisement
Table of Contents
