Table of Contents
Advertisement
12 Configuration by the operator
12.6 Pairing the device with an external
Requirement
Result
302
EN
MEDUCORE Standard
device via the Bluetooth
(only with Bluetooth
transmission option)
®
•
The Bluetooth
activated
(see "13.12 System settings", page
•
An external device with a Bluetooth
System for digital patient data recording) is within range.
1. Activate the operator menu
menu", page
307).
2. Select Communication settings | Pair Bluetooth
The device waits to pair with an external device.
3. Activate the Bluetooth
4. Check whether the PIN displayed on the device is shown on the
external device.
5. If the PIN displayed on the device and on the external device are
identical: Confirm the pairing on the device and the external
device.
Device and external device are paired.
The device and the external device are paired via the Bluetooth
interface. The external device can connect to the device and
interrogate device data via the Bluetooth
2
®
data transmission option is enabled and
(see "13.1 Activating the operator
®
interface of the external device.
®
interface
data
342).
®
interface (Example:
®
devices.
®
interface.
®
Advertisement
Table of Contents
