Table of Contents
Advertisement
6 Operation
Result
6.10.2 Carrying out 6-lead ECG monitoring
Requirement
168
EN
MEDUCORE Standard
8. If ECG electrodes are used at the same time as defibrillation
electrodes: Do not allow ECG electrodes and defibrillation
electrodes to overlap.
9. If necessary: Stroke out any air trapped under the ECG
electrodes.
10. Clip the ECG cable to the individual ECG electrodes.
11. Check whether the ECG curves for ECG recording displayed on
the device are plausible.
The 6-lead ECG cable and the ECG electrodes are connected. 6-
lead ECG monitoring is prepared.
•
The device is switched on
page
118).
•
A patient group is selected
page
120).
•
6-lead ECG monitoring is prepared
6-lead ECG monitoring", page
1. If the patient group is incorrect: Select another patient group
(see "6.4 Selecting patient group", page
2. If necessary: Select monitor mode using the Monitor function
button.
3. If necessary: Switch between parameter view and curve view
with the view button
4. Following a shock delivery: Wait until the ECG has stabilized
again.
2
(see "6.1 Switching on the device",
(see "6.4 Selecting patient group",
(see "6.10.1 Preparing
164).
120).
.
Advertisement
Table of Contents
