Table of Contents
Advertisement
5. Use the Amplitude function button to adapt the amplitude
6. Use the Feed function button to adapt the feed rate of the
7. Use the ffw function button to adapt the scrolling resolution.
8. Shift the session as from the time of the event using the
9. Analyze the event in the session.
10. If desired (only with Printing option): Print the replay view of
Result
A session has been analyzed in replay view on the device.
6.17.3 Analyzing and delivering a 12-lead ECG of a
session (only with 12-lead ECG option)
Requirement
•
•
1. Select a session with at least one 12-lead ECG (Yes in the 12-
2. Confirm with the OK function button.
3. Select the Display 12-lead ECG menu item.
scaling to adapt the displayed height of the ECG curve to the
ECG measuring signal.
ECG curve.
navigation knob.
the event
(see "6.16.6 Printing replay view (only with Printing
and Replay view options)", page
The 12-lead ECG option is enabled and activated
System settings", page
If e-mail delivery 12-lead ECG is desired: A default network has
been configured
(see "12.3 Configuring default network",
page
292).
lead column) in the session archive
session in the session archive", page
The device displays all 12-lead ECGs recorded during the
selected session.
203).
342).
(see "6.17.1 Selecting a
205).
MEDUCORE Standard
6 Operation
(see "13.12
2
EN
209
Advertisement
Table of Contents
