Table of Contents
Advertisement
3. Select the Print menu item.
4. To stop printing manually: Select the Stop print xx s menu
If you are the operator of the device and have access to the
operator menu, you can adapt automatic stopping of printing to
suit your requirements:
Operator menu | Printer settings | Automatic stop print
"13.9 Printer settings (only with Printing option)", page 332)
Result
The measured values and curves currently shown in the display
have been printed.
6.16.3 Printing 12-lead ECG (only with 12-lead ECG
option)
Requirement
•
•
•
1. If necessary: Use the Feed function button to change the feed
The printer prints current measured values and the curves
currently shown in the display on printer paper for 10 s (shown
in abstract form here):
item.
A printer has been connected to the device
Connecting the printer to the device", page
A 12-lead ECG recording and assessment has been carried out
(see "6.11.2 Carrying out and delivering 12-lead ECG
recording and assessment", page
12-lead ECG function mode is activated.
rate of the ECG curve.
177).
MEDUCORE Standard
6 Operation
(see
(see "6.16.1
196).
2
EN
199
Advertisement
Table of Contents
