Table of Contents
Advertisement
3 Description
No.
Designation
Alarm indicator
6
Patient group
7
Mode indicator
8
Alarm limits
9
History
10
Top curve field
11
Center curve field
12
Bottom curve field
13
Heart rate tone/pulse tone
14
ECG lead selection
15
Manual mode (only with Manual
16
defibrillation option)
ECG calibration mark
17
AED mode
18
NIBP
19
Pulse
20
SpO
21
2
HR
22
DIA
23
SYS
24
46
EN
MEDUCORE Standard
Description
Indicates the status of audio alarm output:
•
Audio alarm output active
•
Audio alarm output muted/paused
•
Audio alarm output canceled
Displays the selected patient group:
•
Adult
•
Child
•
Infant
Indicates the mode currently selected.
Displays the set alarm limits.
Shows the time and values of the last three NIBP
measurements.
Displays the ECG lead via the defibrillation electrodes/
paddles (Pad, II).
Displays the selected ECG lead:
•
I, II, III, aVR, aVL or aVF
•
V1 to V6 (only with 12-lead ECG extension cable
and only with 12-lead ECG option)
Displays the plethysmogram.
Switches the heart rate tone/pulse tone on and off.
Allows switching between the ECG leads displayed in
the center curve field:
•
Limb leads acc. to Einthoven (I, II, III)
•
Limb leads acc. to Goldberger (aVR, aVL, aVF)
•
Chest wall leads acc. to Wilson (V1 to V6) (only
with 12-lead ECG extension cable and only with
12-lead ECG option)
Provides access to manual mode.
Displays the section corresponding to 1 mV of the
ECG signal.
Provides access to AED mode.
Displays blood pressure.
Displays pulse rate.
Displays oxygen saturation.
Displays heart rate.
Displays the diastolic measured value for an NIBP
measurement.
Displays the systolic measured value for an NIBP
measurement.
2
Advertisement
Table of Contents
