Table of Contents
Advertisement
13 Operator menu
13.12.2 Possible values
Parameter
Device name
-
Telephone
-
contact
Start mode
-
Start view
-
Brightness
Display
Night colors
344
EN
MEDUCORE Standard
Possible
Description
values
Here you can enter the device
name, the location of the
device or some other
identification. The device
name appears on the
-
printout and in the PDF of the
12-lead ECG. It assigns the
12-lead ECG to the device
with which the 12-lead ECG
was created.
Here you can enter a
telephone number for
queries. The telephone
-
contact appears in the
Device information menu
item and in the PDF of the
12-lead ECG.
Here you can set in which
Monitor
mode the device is to start.
AED
Manual mode is not available
Manual
if parameter view has been
selected as the start view.
Here you can set in which
view the device is to start.
Curve
Parameter view is not
Parameter
available if manual mode has
been selected as the start
mode.
10 %-100 %,
Here you can set the display
in increments of
brightness.
10
Activated
Here you can set whether the
device is to start with night
Deactivated
colors.
2
Factory
setting
MEDUCORE
Standard2
-
Monitor
Curve
70 %
Deactivated
Advertisement
Table of Contents
