Table of Contents
Advertisement
Only use the power supply unit and charger for the printer
battery for charging the printer battery in the charging station
for the printer battery.
Do not use the power supply unit and charger in the patient's
vicinity.
Caution
Malfunction or failure of the printer due to electromagnetic
radiation in airplane mode!
Electromagnetic radiation in airplane mode may lead to special
characters appearing in the printout or to failure of the printer.
Do not use the printer in airplane mode.
Delayed therapy due to unsuitable printer paper!
Unsuitable printer paper may lead to poor print quality on the
printout or to paper jams and delay treatment.
Only use printer paper approved by WEINMANN Emergency. If
this is not possible: Only use printer paper which satisfies the
specifications listed
page
Do not used printer paper where the paper is glued to the roll.
Use printer paper that has an end marking.
Delayed therapy due to incorrect handling of printer paper!
Incorrect handling of the printer paper may lead to poor print
quality on the printout and delay treatment.
To prevent the inks on the printer paper fading, do not use
chemicals or oil.
Do not expose printer paper to significant heat, moisture or
sunlight
Keep printer paper away from sharp or hard objects (e.g.
fingernails or metal) in order not to scratch the printer paper.
Store printer paper in a cool, dry, dark place.
Do not use chemical adhesive.
Keep printer paper away from plastics which emit vapors.
Always use clean printer paper.
Malfunction or failure of the printer due to external
influences and incorrect use!
The printer may be damaged by external influences and incorrect
use.
Always use the printer in the printer case.
Do not drop the printer.
Do not expose the printer to severe shocks.
Do not expose the printer to direct sunlight or similar
conditions.
(see "18.8 Printer and printer paper",
372).
(see "18.8 Printer and printer paper", page
MEDUCORE Standard
2 Safety
372).
2
EN
31
Advertisement
Table of Contents
