After Turning On The Cutting Plotter; Machine Caution Label; Precautions For Electrostatic Panel - GRAPHTEC FCX4000 SERIES User Manual

After Turning on the Cutting Plotter

During operations, immediately after completion of operations, and when setting the cutting plotter functions,
the pen carriage, Y bar, and other parts which are not fixed, may move suddenly. Do not let your hands, hair, or
clothing get too close to the moving parts or within their range of movement. Do not place any foreign objects in
or near these areas either. If your hands, hair, clothing, or the like get caught in, or wrapped around moving parts,
you may be injured and the machine may be damaged.

Machine Caution Label

The following Warning Label is located on this cutting plotter. Please observe all the warning on the label.

Precautions for electrostatic panel

If you accidentally cut the electrostatic panel surface, you may get an electric shock.
In this case, contact your sales representative or nearest Graphtec vendor.
Although you may feel rubber smell, it is not a malfunction of the product. As you use it, the smell gradually
reduces.
There may be the bloom on the surface of the electrostatic panel. In this case, wipe the panel surface gently with
a dry, soft cloth.
Be careful not to adhere the neutral detergent to the panel surface. If it adheres, electrostatic adsorption is
decreased or lost.
III