After Turning on the Plotter
During the course of turning on the plotter, be sure to observe the following precautions. The tool carriage and
loaded media may suddenly move during the cutting operation, immediately afterward and when setting the
plotter's functions. Keep hands, hair, clothing and other objects out of the vicinity of the tool carriage, grit rollers
and loaded media. To prevent operator injury and poor cutting results, be careful not to allow hands, hair, clothing
or other foreign objects to become entangled with the tool carriage or loaded media while the plotter is operating.
Machine Caution Label
The Caution Label is located on the machine. Be sure to observe all the cautions on the label.
Notes on the Stand
Be sure to use only the stand designed for the CE7000-130AP with your CE7000-130AP plotter. The use of a
different stand may cause a plotter malfunction or bodily injury.
Notes on the basket
If the supplied basket is not used, problems in cutting quality may occur. Be sure to use the basket.
IV