After Turning On The Plotter; Machine Caution Label; About The Words And Phrases In This Text - GRAPHTEC CE6000-120AP User Manual

After Turning on the Plotter

During the course of turning on the plotter, be sure to observe the following precautions. The tool carriage
and loaded media may suddenly move during the cutting operation, immediately afterward and when setting
the plotter's functions. Keep hands, hair, clothing and other objects out of the vicinity of the tool carriage, grit
rollers and loaded media. To prevent operator injury and poor cutting results, be careful not to allow hands,
hair, clothing or other foreign objects to become entangled with the tool carriage or loaded media while the
plotter is operating.
During a plotting or cutting operation, do not touch the gears, rollers, or other moving parts.
Please be careful not to get your fingers pinched or stuck on the gears, rollers, or other moving parts when
loading the medium.

Machine Caution Label

The machine's Caution Label is located on the top cover. Be sure to observe all the cautions on the label.

About the words and phrases in this text

• In this instruction manual, the word "plot" refers to operating the machine and using either the plotting pen
or the cutter pen to cut.
• In this instruction manual, the word "media" refers to paper, roll, or sheet media.
III