Changing The Video Input Source; Selecting The Default Layout For A Single Screen - Yealink VC880 Administrator's Manual

• Configuring Automatic Sleep Time
• CEC Monitor Controls
• System Integrated with Control Systems

Changing the Video Input Source

Your system supports camera and PC video input source. The video input source is camera by default, if you want to
view the PC content, you can switch video input source to PC.
Procedure
Do one of the following during a call:
On your web user interface, go to Home > Input Choose.
•
•
On your remote control, press
• If you select PC, the remote video image is shown in big size, and the PC content is shown in small size
(Picture-in-Picture).
• If you select Camera+PC, the PC content is shown in big size, and other video images are shown in small
size.
• If you select Camera, the remote video image is shown in big size, and the local video image is shown in
small size (Picture-in-Picture).

Selecting the Default Layout for a Single Screen

When only one monitor is connected to the system, you can configure the default layout when a call is established.
Procedure
1. On your web user interface, go to Setting > Call Features > Layout > Default Layout.
2. Configure and save the following settings:
Parameter
Default Layout of Single
Screen
or OK key to open Talk Menu, and select Input Choose.
Description
Configures the default layout
of single screen when a call is
established.
• Remote big Local small—
the remote video image is
shown in big size, and the
local video image below is
shown in small size.
Remote Full screen—the
•
remote video image is shown
in full size.
• Equal—the remote and local
video images are shown in
the same size.
• Picture In Picture—the
remote video image is shown
in full screen, and local video
image is shown in the PIP
(Picture-in-Picture).
Default: Picture-in-picture.
| Configuring System Settings | 122
Configuration Method
Web user interface