Danfoss VLT AutomationDrive FC 301 Programming Manual page 277

Parameter Descriptions
23-04 Occurrence
Array [10]
Option: Function:
[29] Day 20 of
month
[30] Day 21 of
month
[31] Day 22 of
month
[32] Day 23 of
month
[33] Day 24 of
month
[34] Day 25 of
month
[35] Day 26 of
month
[36] Day 27 of
month
[37] Day 28 of
month
[38] Day 29 of
month
[39] Day 30 of
month
[40] Day 31 of
month
23-08 Timed Actions Mode
Used to enable and disable automatic timed actions.
Option: Function:
[0] Timed Actions Enable timed actions.
*
Auto
[1] Timed Actions Disable timed actions, normal
Disabled operation according to control
commands.
[2] Constant On Disable timed actions. Constant On
Actions Actions activated.
[3] Constant Off Disable timed actions. Constant Off
Actions Actions activated.
23-09 Timed Actions Reactivation
Option: Function:
[0] Disabled After an update of time/condition
M0013101
Programming Guide
•
power cycling
•
setting date
•
time
•
change of summertime
•
change of Hand Auto
mode
•
change of Constant ON
and OFF
Danfoss A/S © 10/2019 All rights reserved.
23-09 Timed Actions Reactivation
Option: Function:
set-up change all activated ON
actions are overridden to OFF
actions until passing the next time
for an ON action. Any OFF actions
remain unchanged.
[1] Enabled After an update of time/condition
*
On and OFF actions are
immediately set to the actual time
programming of ON and OFF
actions.
See the example of a reactivation test in Illustration 3.70.
Timed Action
ON: RUN
OFF: STOP
Power
Power
Cycle
Cycle
P23-09:
P23-09:
Disabled
Disabled
Status
RUNNING
STOPPED
Illustration 3.70 Reactivation Test Diagram
P23-09: Power
Disable Cycle
P23-09:
Enabled
Enable
275
3 3