Danfoss VLT AutomationDrive FC 301 Programming Manual page 227

Parameter Descriptions
13-52 SL Controller Action
Option: Function:
from either the digital inputs or via
a fieldbus.
[16] Select preset Selects preset reference 6.
ref 6 If the active preset reference is
changed, it merges with other
preset reference commands coming
from either the digital inputs or via
a fieldbus.
[17] Select preset Selects preset reference 7.
ref 7 If the active preset reference is
changed, it merges with other
preset reference commands coming
from either the digital inputs or via
a fieldbus.
[18] Select ramp 1 Selects ramp 1.
[19] Select ramp 2 Selects ramp 2.
[20] Select ramp 3 Selects ramp 3.
[21] Select ramp 4 Selects ramp 4.
[22] Run Issues a start command to the
frequency converter.
[23] Run reverse Issues a start reverse command to
the frequency converter.
[24] Stop Issues a stop command to the
frequency converter.
[25] Qstop Issues a quick stop command to
the frequency converter.
[26] Dcstop Issues a DC stop command to the
frequency converter.
[27] Coast The frequency converter coasts
immediately. All stop commands
including the coast command stop
the SLC.
[28] Freeze output Freezes the output frequency of the
frequency converter.
[29] Start timer 0 Starts timer 0, see
parameter 13-20 SL Controller Timer
for further description.
[30] Start timer 1 Starts timer 1, see
parameter 13-20 SL Controller Timer
for further description.
[31] Start timer 2 Starts timer 2, see
parameter 13-20 SL Controller Timer
for further description.
[32] Set digital out Any output with smart logic output
A low A is low.
[33] Set digital out Any output with smart logic output
B low B is low.
M0013101
Programming Guide
13-52 SL Controller Action
Option:
[34]
[35]
[36]
[37]
[38]
[39]
[40]
[41]
[42]
[43]
[60]
[61]
[62]
[63]
[64]
[65]
[70]
[71]
[72]
[73]
[74]
Danfoss A/S © 10/2019 All rights reserved.
Function:
Set digital out Any output with smart logic output
C low C is low.
Set digital out Any output with smart logic output
D low D is low.
Set digital out Any output with smart logic output
E low E is low.
Set digital out Any output with smart logic output
F low F is low.
Set digital out Any output with smart logic output
A high A is high.
Set digital out Any output with smart logic output
B high B is high.
Set digital out Any output with smart logic output
C high C is high.
Set digital out Any output with smart logic output
D high D is high.
Set digital out Any output with smart logic output
E high E is high.
Set digital out Any output with smart logic output
F high F is high.
Reset Counter Resets counter A to 0.
A
Reset Counter Resets counter B to 0.
B
Counter A (up)
Counter A
(down)
Counter B (up)
Counter B
(down)
Start timer 3 Starts timer 3, see
parameter 13-20 SL Controller Timer
for further description.
Start timer 4 Starts timer 4, see
parameter 13-20 SL Controller Timer
for further description.
Start timer 5 Starts timer 5, see
parameter 13-20 SL Controller Timer
for further description.
Start timer 6 Starts timer 6, see
parameter 13-20 SL Controller Timer
for further description.
Start timer 7 Starts timer 7, see
parameter 13-20 SL Controller Timer
for further description.
3 3
225