Danfoss VLT AutomationDrive FC 301 Programming Manual page 48

Parameter Descriptions
0-50 LCP Copy
Option:
[4] File from MCO
to LCP
[5] File from LCP
3 3
to MCO
[6] Data from
DYN to LCP
[7] Data from LCP
to DYN
[9] Safety Par.
from LCP
[10] Delete LCP
copy data
0-51 Set-up Copy
Option:
[0] No copy
*
[1] Copy to set-up
1
[2] Copy to set-up
2
[3] Copy to set-up
3
[4] Copy to set-up
4
[9] Copy to all
3.1.7 0-6* Password
0-60 Main Menu Password
Range:
100
*
9999 ]
46
Function:
Use to delete the copy after the
transfer is complete.
Function:
No function.
Copies all parameters in the present
programming set-up (defined in
parameter 0-11 Edit Set-up) to set-up
1.
Copies all parameters in the present
programming set-up (defined in
parameter 0-11 Edit Set-up) to set-up
2.
Copies all parameters in the present
programming set-up (defined in
parameter 0-11 Edit Set-up) to set-up
3.
Copies all parameters in the present
programming set-up (defined in
parameter 0-11 Edit Set-up) to set-up
4.
Copies the parameters in the
present set-up to each of the set-
ups 1 to 4.
Function:
[-9999 - Define the password for access to
the Main Menu via the [Main Menu]
key. If parameter 0-61 Access to Main
Menu w/o Password is set to [0] Full
access, this parameter is ignored.
Danfoss A/S © 10/2019 All rights reserved.
®
VLT AutomationDrive FC 301/302
0-61 Access to Main Menu w/o Password
Option:
[0]
*
[1]
[2]
[3]
[4]
[5]
[6]
If [0] Full access is selected, parameter 0-60 Main Menu
Password, parameter 0-65 Personal Menu Password, and
parameter 0-66 Access to Personal Menu w/o Password are
ignored.
NOTICE
A more complex password protection is available for
OEMs upon request.
0-65 Personal Menu Password
Range:
200
*
0-66 Access to Personal Menu w/o Password
If parameter 0-61 Access to Main Menu w/o Password is set to [0]
Full access, then this parameter is ignored.
Option:
[0]
*
[1]
[3]
[5]
Function:
Full access Disables password defined in
parameter 0-60 Main Menu
Password.
LCP: Read only Prevent unauthorized editing of
Main Menu parameters.
LCP: No access Prevent unauthorized viewing and
editing of Main Menu parameters.
Bus: Read only Read-only functions for parameters
on fieldbus and/or FC standard bus.
Bus: No access No access to parameters is allowed
via fieldbus and/or FC standard bus.
All: Read only Read-only function for parameters
on LCP, fieldbus, or FC standard
bus.
All: No access No access from LCP, fieldbus, or FC
standard bus is allowed.
Function:
[-9999 - Define the password for access to
9999 ] the Quick Menu via the [Quick
Menu] key. If parameter 0-66 Access
to Personal Menu w/o Password is
set to [0] Full access, this parameter
is ignored.
Function:
Full access Disables the password defined in
parameter 0-65 Personal Menu
Password.
LCP: Read only Prevents unauthorized editing of
Quick Menu parameters.
Bus: Read only Read-only functions for Quick Menu
parameters on fieldbus and/or FC
standard bus.
Read-only function for Quick Menu
All: Read only
parameters on LCP, fieldbus, or
frequency converter standard bus.
M0013101