Danfoss VLT AutomationDrive FC 301 Programming Manual page 212

Parameter Descriptions
Parameter
Parameter 13-41 Logic Rule
Operator 1 [0]
Parameter 13-40 Logic Rule
Boolean 1 [1]
3 3
Parameter 13-42 Logic Rule
Boolean 2 [1]
Parameter 13-41 Logic Rule
Operator 1 [1]
Parameter 13-15 RS-FF Operand
S [0]
Parameter 13-16 RS-FF Operand
R [0]
Parameter 13-51 SL Controller 1
Event [0]
Parameter 13-52 SL Controller 1
Action [0]
Parameter 13-51 SL Controller 1
Event [1]
Parameter 13-52 SL Controller 1
Action [1]
Table 3.28 Operators
13-15 RS-FF Operand S
Option:
[0] False
[1] True
[2] Running
[3] In range
[4] On reference
[5] Torque limit
[6] Current Limit
[7] Out of current
range
[8] Below I low
[9] Above I high
[10] Out of speed
range
[11] Below speed
low
[12] Above speed
high
[13] Out of feedb.
range
210
®
VLT AutomationDrive FC 301/302
Setting Notes
[3] AND
–
NOT
[37] Digital
–
Input DI32
[2] Running –
[1] AND –
Output from
[26] Logic parameter 13-41 Log
rule 0 ic Rule Operator 1
[0].
Output from
[27] Logic parameter 13-41 Log
rule 1 ic Rule Operator 1
[1].
Output from
parameter 13-15 RS-
[94] RS
FF Operand S and
Flipflop 0
parameter 13-16 RS-
FF Operand R.
[22] Run –
[27] Logic
–
rule 1
[24] Stop –
Function:
Danfoss A/S © 10/2019 All rights reserved.
13-15 RS-FF Operand S
Option: Function:
[14] Below feedb.
low
[15] Above feedb.
high
[16] Thermal
warning
[17] Mains out of
range
[18] Reversing
[19] Warning
[20] Alarm (trip)
[21] Alarm (trip
lock)
[22] Comparator 0
[23] Comparator 1
[24] Comparator 2
[25] Comparator 3
[26] Logic rule 0
[27] Logic rule 1
[28] Logic rule 2
[29] Logic rule 3
[30] SL Time-out 0
[31] SL Time-out 1
[32] SL Time-out 2
[33] Digital input
DI18
[34] Digital input
DI19
[35] Digital input
DI27
[36] Digital input
DI29
[37] Digital input
DI32
[38] Digital input
DI33
[39] Start
command
[40] Drive stopped
[41] Reset Trip
[42] Auto-reset Trip
[43] Ok key [OK] is pressed. Only available on
the graphical LCP.
[44] Reset key [Reset] is pressed. Only available on
the graphical LCP.
[45] Left key [◄] is pressed. Only available on the
graphical LCP.
[46] Right key [►] is pressed. Only available on the
graphical LCP.
▲
[47] Up key
[ ] is pressed. Only available on the
graphical LCP.
M0013101