Danfoss VLT AutomationDrive FC 301 Programming Manual page 192

Parameter Descriptions
8-17 Configurable Alarm and Warningword
The configurable alarm and warning word has 16 bits (0–15).
Each of those bits can be configured to any of the following
options.
Option:
3 3
[0] Off
*
[1] 10 Volts low
warning
[2] Live zero
warning
[3] No motor
warning
[4] Mains phase
loss warning
[5] DC link
voltage high
warning
[6] DC link
voltage low
warning
[7] DC
overvoltage
warning
[8] DC
undervoltage
warning
[9] Inverter
overloaded
warning
[10] Motor ETR
overtemp
warning
[11] Motor
thermistor
overtemp
warning
[12] Torque limit
warning
[13] Over current
warning
[14] Earth fault
warning
[17] Controlword
timeout
warning
[19] Discharge
temp high
warning
[22] Hoist mech
brake warning
[23] Internal fans
warning
[24] External fans
warning
190
®
VLT AutomationDrive FC 301/302
Function:
Danfoss A/S © 10/2019 All rights reserved.
8-17 Configurable Alarm and Warningword
The configurable alarm and warning word has 16 bits (0–15).
Each of those bits can be configured to any of the following
options.
Option: Function:
[25] Brake resistor
short circuit
warning
[26] Brake
powerlimit
warning
[27] Brake chopper
short circuit
warning
[28] Brake check
warning
[29] Heatsink
temperature
warning
[30] Motor phase
U warning
[31] Motor phase V
warning
[32] Motor phase
W warning
[34] Fieldbus
communi-
cation
warning
[36] Mains failure
warning
[40] T27 overload
warning
[41] T29 overload
warning
[45] Earth fault 2
warning
[47] 24V supply
low warning
[58] AMA internal
fault warning
[59] Current limit
warning
[60] External
interlock
warning
[61] Feedback error
warning
[62] Frequency
max warning
[64] Voltage limit
warning
[65] Controlboard
overtemp
warning
M0013101