Danfoss VLT AutomationDrive FC 301 Programming Manual page 305

Parameter Descriptions
36-51 Terminal X49/9 Digital Output
Option: Function:
[181] Prev.
Maintenance
[188] AHF Capacitor
Connect
[189] External Fan
Control
[190] Safe Function
active
[191] Safe Opt.
Reset req.
[192] RS Flipflop 0
[193] RS Flipflop 1
[194] RS Flipflop 2
[195] RS Flipflop 3
[196] RS Flipflop 4
[197] RS Flipflop 5
[198] RS Flipflop 6
[199] RS Flipflop 7
[221] IGBT-cooling
[222] Homing OK
[223] On Target
[224] Position Limit
[225] Position Error
[226] Touch on
Target
[227] Touch
Activated
[231] In Power Lim.
Mot.
[232] In Power Lim.
Gen.
[233] In Power Limit
36-52 Terminal X49/9 Min. Scale
Range: Function:
0 % [0 - 200 %] Match the minimum output of
*
terminal X49/9 with a required
value. For more information, see
parameter 36-42 Terminal X49/7 Min.
Scale.
36-53 Terminal X49/9 Max. Scale
Range: Function:
100 % [0 - 200 %] Scale the maximum output of
*
terminal X49/9. For more
information, see
parameter 36-43 Terminal X49/7 Max.
Scale.
M0013101
Programming Guide
36-54 Terminal X49/9 Bus Control
Range:
0 %
*
36-55 Terminal X49/9 Timeout Preset
Range:
0 %
*
3.28.4 36-6* Output X49/11
Use the parameters in this group to configure the mode of
inputs and outputs of VLT
36-60 Terminal X49/11 Analogue Output
Select the functionality of terminal X49/11.
Option:
[0]
*
[52]
[100]
[101]
[102]
[103]
[104]
[105]
[106]
[107]
[108]
[109]
[139]
[141]
36-61 Terminal X49/11 Digital Output
Option:
[0]
*
[1]
[2]
[3]
[4]
[5]
[6]
Danfoss A/S © 10/2019 All rights reserved.
Function:
[0 - 100 %] This parameter contains the output
level of terminal X49/9 if the
terminal is controlled by a fieldbus.
Function:
[0 - 100 %] The frequency converter sends the
value of this parameter to the
output terminal when the terminal
is controlled by a fieldbus and a
timeout is detected.
®
Programmable I/O MCB 115.
Function:
No operation
MCO 0-20mA/
0-10V
Output
frequency
Reference
Feedback
Motor Current
Torque rel to
limit
Torq relate to
rated
Power
Speed
Torque
Max Out Freq
Bus ctrl. 0-20
mA
Bus ctrl
0-20mA t.o.
Function:
No operation
Control Ready
Drive ready
Drive rdy/rem
ctrl
Enable / no
warning
Running
Running / no
warning
3 3
303