Rep 9.23 Drum Encoder Assembly - Xerox 8850 Service Manual

REP 9.23 Drum Encoder Assembly

Parts List on PL 9.1
Switch off the Controller and the Printer Main Power Switches. Disconnect the Printer
Power Cord.
Removal
1. Open the Printer Top Cover. Perform
2. (Figure 1): Lift the Printer Image Module.
1
Lift Image Module to fully opened
position
Figure 1 Lifting the Image Module
3. (Figure 2): Pull open the Fuser Drawer.
8850/ 510DP
WARNING
REP 14.1 Top Cover.
1
Lift the latch and pull out the Fuser Drawer
about 12 inches (30 cm)
Figure 2 Partially Extending the Fuser Drawer
4. (Figure 3): Release the spring tension on the brackets located at either end of the Xero-
graphic Module.
03/2003
4-105
Repairs and Adjustments
REP 9.23