Administering Incoming-Routing Parameters - Avaya G450 Manual

Configuring Standard Local Survivability (SLS)
Note:
Each level of call includes the previous level's dialing privileges. For example,
Note:
locl has the calling privileges of iop, intl, etc. See
of the relationship between the various dial types and the COR permissions.
3. Enter set max-length length to define the maximum length of the dialed string. This
must be set prior to the minimum length if the minimum length is larger than the default
value.
4. Enter set min-length length to define the minimum length of the dialed string.
5. Enter set tgnum tgnum to designate a trunk-group for which this dialed string is
assigned.
6. Enter set deny no to permit stations to originate outgoing trunk calls.
7. At the command-line enter set insert-digits digits to define the digits to insert
into a dialed string, if required.
8. Enter set delete-digits digits to define the number of digits to be deleted from a
dialed string, if required.
Note:
You may either insert or delete digits, but not both.
Note:
9. Enter show to check the outbound dial-pattern string administration.
The report lists the dial-pattern parameters. For example:
Dialed-String/Deny
------------------
10. Enter exit to leave the dial-pattern context in SLS.

Administering incoming-routing parameters

The incoming-routing parameters are useful for mapping DNIS numbers directly into the station
extension numbers when the Service Provider's DNIS plan does not directly reflect the station
extension number length used in the gateway's dial plan.
Note:
Since the PIM application does not automatically extract this information from the
Note:
CM's SAT screen for Incoming-Digit-Treatment-Handling, you must enter this
SLS information via the gateway CLI interface.
182 Administration for the Avaya G450 Media Gateway
Min/Max
Length
------
5381000/n 9/9
5385000/n 9/9
Trunk Delete/Insert
Type Group Digits
---- ----- ----------------------
locl 2 1/303
locl 3 1/720
Figure 13 for an illustration