Auerswald COMpact 5200 Advanced Information page 277

• Configured base number
During an external call, proceed as follows:
1. Press the Flash key or the Query key.
2. Enter the internal base number. Possible entries:
Internal base number for the parking zone
type Direct exchange line phone: with preceding **)
3. Dial the number of the park position. Possible entries:
0 to 9
Note: If you hear a busy signal when you dial the park position, this
position is already in use. Pressing the Flash key or the Query key
takes you back where you can redial the internal base number with
another park position.
4. Wait until you hear the ringtone.
5. Hang up the receiver.
6. Notify the desired communication partner of the waiting caller (e.g., by
making an announcement over the loudspeaker).
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
(for exchange line request
Phoning
Transferring
277