Auerswald COMpact 5200 Advanced Information page 488

Settings – Réseaux publics
Connexions RNIS
Numéro de téléphone supplémentaire
Some countries provide additional numbers for a PTP connection, in
addition to the DDI numbers. The network provider can assign up to ten
phone numbers for the connection.
The additional number specifies which character string a caller must dial
from the local phone network to reach the ISDN PTP connection. These
numbers are not attached to the PBX base number.
Note: You can input up to 250 external numbers for land line and VoIP
connections in the PBX. In other words, the total maximum number of
MSNs, DDI numbers and additional numbers is 250.
Phone number for CLIP no screening
Requirements:
• Set up phone number
• CLIP no screening switched on for the ISDN connection
• The exchange line must support CLIP no screening
Customer-specific phone number (e.g. a service phone number) that is
transferred to the destination by the exchange line without its correctness
being checked.
Nom
The name is used for display purposes on the system phone.
488
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018