Auerswald COMpact 5200 Advanced Information page 433

Settings – Réseaux publics
Connexions analogiques
The type of CLIP information specifies whether, and how, the analogue
network provider sends the CLIP information.
Aucune
The network provider does not send the CLIP information.
FSK
The network provider uses Frequency Shift Keying to send the CLIP infor-
mation.
DTMF and DTMF (MaxComm)
The network provider uses Dual Tone Multi Frequency signalling to send the
CLIP information.
Sous-version de CLIP
The CLIP sub-version specifies when the analogue network provider sends
the CLIP information.
Aucune analyse des informations CLIP
The data sent by the network provider is not forwarded to the internal
subscriber.
Amplification (0 à +25 dB)
CLIP information amplification specifies the number of decibels by which the
PBX increases or reduces all the audio signals when CLIP information is
being received.
433
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018