Uploading The Configuration Automatically - Auerswald COMpact 5200 Advanced Information

Voip pbx for medium sized business

Hide thumbs Also See for COMpact 5200:

Table of Contents

Note: Any network settings saved in the configuration file will be taken

over during automatic uploading. If the network settings were not saved

in the configuration file, the factory network settings will be retained.

1. Rename the configuration file saved on the PC to auconfig.cfg.

2. Save the configuration file in the root directory of a USB memory stick.

Further steps:

Perform the automatic upload of the configuration.

Uploading the Configuration Automatically

Proceed as follows:

Using the PBX

Requirements:

PBX set to factory settings

Configuration file named auconfig.cfg saved on a USB memory stick

COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018

Functions, Uses, Concepts

Backing Up and Recovering Configuration Data

Compact 5200r Compact 5500r