Auerswald COMpact 5200 Advanced Information page 565

The default exchange line access number on the PBX is 0 in the factory
settings. However, this can be changed. Note that changing the
exchange line access number restricts the phone numbering plan.
The internal number entered here needs to be entered in the ISDN unit
or in the system phone as the (first) MSN. Also on an ISDN unit, make
sure that the phone number is transmitted to the PBX.
Nom
Freely selectable name. This name is used to identify the subscriber within
the PBX and the connected system phones. The name can also be trans-
ferred to the VoIP end devices via LDAP server.
Module Port
Module and port to which the end device (e. g. phone) is connected.
Type de périphérique
Device type depending on the end device connected.
Analogue end devices:
• Téléphone
Analogue phone, analogue modem
• Répondeur
Analogue answering machine
• Fax
Analogue fax machine
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
Settings – Abonnés (Abo)
Numéros de téléphone
565