Auerswald COMpact 5200 Advanced Information page 461

• Connection type PTP connection at external S
Numéro de téléphone du système
A PTP connection has a PBX base number (base number, header, base
phone number) and (Direct Dial In - DDI) extension numbers. The network
provider assigns the phone numbers for the connection. The phone number
to be dialled is formed from the PBX base number + (DDI) extension
number.
Nom
For identification of the connection within the PBX.
Extensions block (DDI numbers)
A PTP connection has a PBX base number (base number, header, base
phone number) and (Direct Dial In - DDI) extension numbers. The network
provider assigns the phone numbers for the connection. The phone number
to be dialled is formed from the PBX base number + (DDI) extension
number.
Notes:
you can enter a zero both as a single number (e.g. 0 to 99, as is usually
the case) and as a digit in the set number of places in extension numbers
(e.g. 00 to 99).
If linear call distribution for the PTP connection is enabled (Réseaux
publics > Acheminement des appels page), and if the internal
numbers match the external extension numbers, the system automati-
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
port
0
de À
Settings – Réseaux publics
Connexions RNIS
461