Auerswald COMpact 5200 Advanced Information page 618

Settings – Abonnés (Abo)
Propriétés / Synthèse des fonctions
settings are not identical in this regard. In this case, the phone should be
reconfigured. However, this is not possible with some phones. In such
cases, it is necessary to change the subscriber settings at this point.
Adopter depuis Administration ->SIPS/SRTP interne (par défaut)
The PBX setting is adopted for the subscriber.
Seulement chiffré
Example: SRTP is not configured in the PBX, however, the phone
requires this.
Seulement non crypté
Example: SRTP is configured on the PBX, however, the phone does not
support SRTP.
Format du numéro de téléphone transmis
The PBX supports several formats to display the country code of incoming
calls on the display of the VoIP phone being called, e. g. adjusted to a small
display.
Note: For some phones of other manufacturers it may be necessary to
select the option Sans indicatif international (p. ex. 05306...) so that
the country code is dialled with a zero when calling back. This configu-
ration is not necessary for system phones.
618
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018