Auerswald COMpact 5200 Advanced Information page 609

Paramètres
If call forwarding has been configured for the internal destination of an
existing call forwarding, it is possible to reroute already forwarded calls
(cascading).

Calls also will be rerouted to the new call forwarding destination.
During cascading, the PBX memorises the subscribers who have already
been called for this call. If the subscriber is the destination of a call
forwarding again, the call ends with the previous destination.
The caller hears the dial tone until the call is accepted. If the destination is
busy or the maximum call duration has been reached, a busy signal is
issued.

Cascading does not take place. Calls end with the entered destination.
Paramètres

Calls directed to a group in which the subscriber is logged in as
incoming will be forwarded to the CF destination of the subscriber.
Transf. immédiat

Internal and external calls to the subscriber are forwarded immediately
to the entered destination number.
Transf. si occupé

Internal and external calls to the subscriber are forwarded on busy to
the entered destination number.
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
Transfert en cascade
Transf. si appel par un groupe
Numéro de téléphone composé
Numéro de téléphone composé
Settings – Abonnés (Abo)
Propriétés / Synthèse des fonctions
609