Auerswald COMpact 5200 Advanced Information page 211

Voip pbx for medium sized business

Hide thumbs Also See for COMpact 5200:

Table of Contents

Note: The user passwords are needed to authenticate the VoIP phones

when they are registered with the PBX.

5. Configure the VoIP end devices. To do this, you need the following infor-

IP address or URL of the PBX

SIP port of the internal VoIP registrar

Internal number of the VoIP subscriber

User password of the VoIP subscriber

Note: You will find notes about how to configure different VoIP end

devices on the Internet (see www.auerswald.de/service).

6. Check whether the VoIP subscriber was successfully registered on the

PBX (page Surveillance > Status int. VoIP subscribers).

7. If necessary, enable DiffServ, to increase VoIP call quality (Quality of

Service (QoS)).

8. If necessary, make the VoIP settings (Jitter buffer, Echo cancellation) for

the VoIP subscribers to improve the call quality.

COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018

Functions, Uses, Concepts

Compact 5200r Compact 5500r