Configuring Internal Ip Telephony - Auerswald COMpact 5200 Advanced Information

Voip pbx for medium sized business

Hide thumbs Also See for COMpact 5200:

Table of Contents

Functions, Uses, Concepts

6. Set up call distribution (for incoming calls).

7. If necessary, enable DiffServ in order to increase VoIP call quality.

8. Check whether the registration of the VoIP account was successful

(Surveillance > Statut comptes VoIP).

Note: If no calls are possible via VoIP, although account registration and

perhaps even an initial call were successful, this might have something

to do with a very short timeout configured in the firewall. Reduce the

Interval for NAT Keep Alive for all of the providers used (Réseaux

publics > Voix sur IP (VoIP) > Fournisseur > Configurer).

Configuring Internal IP Telephony

Requirements:

Internal VoIP channel (optional, see Technical Data in the Instructions)

Proceed as follows:

1. Configure a VoIP channel as an internal VoIP channel for each planned

internal VoIP subscriber.

2. If necessary, configure the Port SIP du registre VoIP interne.

3. Create internal numbers for the VoIP subscribers.

4. If required, change the automatically generated PINs and passwords.

COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018

Compact 5200r Compact 5500r