Auerswald COMpact 5200 Advanced Information page 422

Settings – Réseaux publics
Connexions analogiques
Connexion analogique
Nom de la connexion analogique
For identification of the port within the PBX.
GSM

The analogue port supports the GSM gateway connected to it. Any
phone number can be used for the analogue port. It must be entered in the
PBX and GSM gateway configurations.
Notes:
GSM gateways accept external phone calls automatically. This may
cause call charges for the caller, even if no-one picks up the phone at
the internal destination.
If the PBX is not connected to the land line, outgoing external calls can
only be accepted via a targeted exchange line access using the phone
numbers entered on the Routage > VoIP/GSM Routing > Numéros de
téléphone d'exception page (and the corresponding accesses, also
configured on this page) or via a configured preferred exchange line
(exchange line settings for subscribers or groups).
LCR
Requirements:
• Network provider must support the dial-around service
• Configured prefixes (country prefix and local area code)
• Configured LCR (see Functions, Uses, Concepts > LCR section)
422
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018