Auerswald COMpact 5200 Advanced Information page 737

The default exchange line access number on the PBX is 0 in the factory
settings. However, this can be changed. Note that changing the
exchange line access number restricts the phone numbering plan.
Nom
Freely selectable name. This name is used to identify the door terminal
within the PBX and the connected system phones. The name can also be
transferred to the VoIP end devices via LDAP server.
Module Port
Module and port to which the device that can be used as door terminal (e. g.
a TFS Universal-Plus) is connected.
Configurer
Opens the configuration of the door terminal.
Door terminal calls+Relay
Relais
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
Settings – Périphériques
Interphones
737